(JZ182A) Access Point “Aruba” AP-377

Aruba 370 Series Access Points (AP-377)

Weatherproof and temperature hardened, Aruba 370 series access points deliver 802.11ac Wave 2 Gigabit Wi-Fi to outdoor and environmentally challenging locations.

Delivers 4×4:4SS MU-MIMO capability, Aruba’s advanced ClientMatch and an integrated Bluetooth beacon to enable Aruba location services. Also for improved network simplicity and security, Dynamic Segmentation automatically enforces real-time device-level access policies on Aruba wired and wireless networks.

Simple to buy, simple to install

The 370 series is as simple to install as an outdoor video camera and features integrated antenna options for easy deployment.

Aesthetic and inconspicuous design

370 series APs – with or without external antennas – are totally unobtrusive and look just like any other common outdoor fixture.

Integrated Bluetooth Beacon

370 series APs have an integrated BLE Beacon to simplify management of a large-scale network of battery-powered Aruba Beacons.

Choose Your Operating Mode

As unified APs, the Aruba 370 Series can be deployed with or without a controller and can be readily switched to accommodate changing network needs.

• Controller mode: When managed by Aruba Mobility Controllers, Aruba 370 Series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding or,
• Controllerless (Instant) mode: In Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up one Instant AP, configure it over the air, and plug in the other APs – Instant Network.

Other functional modes include:

• Remote AP (RAP) mode for branch deployments
• Air monitor (AM) for wireless IDS, rogue detection and containment
• Spectrum analyzer, dedicated or hybrid, for identifying sources of RF interference
• Secure enterprise mesh
• Hybrid AP serves Wi-Fi clients and provides wireless intrusion protection and spectrum analysis

For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Unified APs are factory-shipped to any site and configure themselves when powered up.

AP-374

• 5 GHz 802.11ac 4×4 MU-MIMO (1,733 Mbps max rate)
  • Four Nf connectors for external antenna operation
• 2.4 GHz 802.11n 2×2 MIMO (300 Mbps max rate) radios
  • Two Nf connectors for external antenna operation at 2.4 GHz

AP-375

• 5 GHz 802.11ac 4×4 MU-MIMO (1,733 Mbps max rate)
  • Internal Omni Antennas 4.6 dBi
• 2.4 GHz 802.11n 2×2 MIMO (300 Mbps max rate) radios
  • Internal Omni Antennas 4.0 dBi

AP-377

• 5 GHz 802.11ac 4×4 MU-MIMO (1,733 Mbps max rate)
  • Internal 80°H x 80°V Directional Antennas 6.3 dBi
• 2.4 GHz 802.11n 2×2 MIMO (300 Mbps max rate) radios
  • Internal 80°H x 80°V Directional Antennas 6.4 dBi

Power

Worst-case power consumption from the AP: 23W
Power sources sold separately
Power over Ethernet (PoE+): 802.3at-compliant
AC Power: 100-240 Volt 50/60Hz AC

For more information about support click here

สนใจ Access Point อื่นๆ นอกจาก AP-377

เลือกดูได้ที่ หน้าสินค้า Access Point ของเรา